[C320-list] head door latch replacement

[danny jensen]

Latest update on getting the replacement part:
I tied to special order the part from West Marine but they could not
order it. I Just ordered the part from www.tchweb.com tel 416-299-0089.
The part has a 4 week lead time from southco. TCH PN = 555-mc0412310.
Cost $66.41. I had to email TCH and they responded with a quote and took
my order via email. Note if you look the part up on the southco site the
documentation is wrong (I think). The link below has the correct
documentation for the part.
Danny

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of danny
jensen
Sent: Sunday, September 30, 2012 12:27 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] head door latch replacement

Manufacturer: Southco Mobella
Part Number : MC-04-123-10
Description : Clam Shell Swing Door Latch,Chrome, Privacy Knob, 1 1/8
inch door, Right and Left In or out, pawl style short

Here is a link to the .pdf
http://www.aboveboardelectronics.com/upload/Southco%20Mobella%20Compact%
20Clamshell%20Swing%20Door%20Latch.pdf

The head door is a right hand pull and the aft cabin door is a left
pull. I usually leave the aft cabin latched open so I temporarily ended
up using the aft cabin door latch for the head latch. I'm not sure how
to change the pull from left to right but I'll sort that out later.

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of danny
jensen
Sent: Sunday, September 30, 2012 9:58 AM
To: C320-List at Catalina320.com
Subject: [C320-list] head door latch replacement

Does anyone know where to find a replacement head door latch? I've got
hull #972 2004. 

The part details follow:
Right Hand
Privacy lock push/pull inside ~ 1/2 inch
Assembly type Slide-in to door edge
3/8" deep x 3/4" bolt
3 1/2" vertical x 2 3/4 horizontal x 1 1/8" inside to fit door.
Screw hole separation on door edge 2 7/8" on center
Screw holes horizontal 2 3/8" from door edge on center

3 1/2
|<O 
|
|-----O<2 3/8 ->| 2 3/4
|
|<O

Thanks for your help.
Danny