[C320-list] Removing Wood Panel

[Bruce]

Its in and working! Looks great too. Thanks for the help!
Bruce
Nauti Time #719

Bruce <swampcreek42 at yahoo.com> wrote:

>Thanks, Lou! That worked! I should've seen that last night but it got late and I was worn out. Anyway, I'm in. So onward with the installation!
>
>Bruce.
>
>Monkey Mail <lou at flyingmonkey.im> wrote:
>
>>Bruce,
>>
>>To remove that wood face you will have to first remove the book case to the left (bow) of the battery selector panel. About 4-6 screws if I recall. Due to the heavy gauge electrical cables attached to the battery selector I would advice doing your looking from the side, at least until you are ready to disassemble the batter cables from the selector to start your project (if you even need to d that).
>>
>>Good luck,
>>Lou Hodac
>>Blue Moon
>>Hull 702
>>
>>Sent from my iPad
>>
>>On Apr 20, 2013, at 10:49 AM, Bruce Hunter <swampcreek42 at yahoo.com> wrote:
>>
>>> 
>>> 
>>> 
>>> I bought a Sensa Tank 100 3 tank monitor, I want to mount the monitor above the battery selector switch on the starboard side. Last night I wanted to look behind the panel to see what was there, I then found out that simply removing the face screws doesen't do it. I'm heading down to the boat now to start taking things apart but I figured I'd post this and check my "not so smart phone" along the way for any advice or hints. 
>>> 
>>> Thanks,
>>> Bruce
>>> Nauti Time #719
>>>