[C320-list] Engine (not) starting

[clburti at gmail.com]

That inline harness fuse is on the port side of the engine.



Fair Winds
Chris Burti
Commitment
Catalina 320, #867



From: Irving Grunes
Sent: ‎Friday‎, ‎August‎ ‎16‎, ‎2013 ‎3‎:‎39‎ ‎AM
To: C320-List at catalina320.com

I think there is an inline fuse in the wiring harness in the cableing going
to the pod.
Also check the connections at the terminal block of that cabeling in the pod
irv grunes
2001 #851


On Fri, Aug 16, 2013 at 1:49 AM, fred.lecuyer at live.com <
fred.lecuyer at live.com> wrote:

> I think there is a fuse in the pod where you were. Check inside the pod.
>
> Fred
> #960
>
> Sent from my HTC Inspire™ 4G on AT&T
>
> ----- Reply message -----
> From: david.allred at verizon.net
> To: <C320-List at Catalina320.com>
> Subject: [C320-list] Engine (not) starting
> Date: Thu, Aug 15, 2013 7:34 pm
>
>
>    My boat is #712 , a 2000 model.  The engine is a Yanmar 3GM30F.
>    DLA
>
>
>    On 08/15/13, Williamyahoo.com> wrote:
>
>    What make on engine do you have ? What year is your boat?
>    Mike Ott
>    Sent from my iPhone
>    On Aug 15, 2013, at 6:56 PM, [1]david.allred at verizon.net wrote:
>    > Today I replaced my temp gauge. The engine cranked as usual, but the
>    > gauge did not appear to work. I took the face off the backing and
>    > fiddled with the gauge connections. When I attempted to start the
>    > engine again, it would not start--nothing at all when I pressed the
>    > start button and I noticed that all the gauges were dead with the key
>    > on. Apparently, there is no electricity going to the control panel. I
>    > depressed the 10 amp breaker switch at the bottom of the panel, but
>    > still nothing. The batteries are good and the RayMarine instruments
>    as
>    > well as everything in the cabin are working. Can you suggest what I
>    > may do? Is there another fuse/relay breaker somewhere? Thanks.
>    > DLA
>
> References
>
>    1. mailto:david.allred at verizon.net
>
>