[C320-list] Need new sails

[Rick From Inflate Co]

Guys, thank you all so much. I ended up calling Ullman just down the street in  Newport/Costa Mesa. Keith over there committed to having both the main and head sail done by this Thursday night and met me at vessel an hour later to measure and advise. I paid retail to get them in time for Labor Day weekend and opted for the Endurance version. It's 7.0 oz Dacron and better made tan the OEM they make for Catalina . The material has a great ripstop vs regular Dacron. I checked the new material, it's cool but overkill for Southern California use, just less stretch and refuses to rip in a line, if you tear , it tears in 3 directions then stops!! Cool stuff. Paid $6650 plus tax for both. So excited!!!!! Thanks everyone again,

Rick
NEMO
#235 Dana Point , CA

Thank you and please excuse any grammatical and/or  typographical  as sent from iPhone.

Rick Portanova | President | CEO
INFLATE CO, INC.
www.InflateCo.com
949-340-0104 Office


On Aug 24, 2013, at 11:35 AM, "DennyBrowne at Verizon.net" <dennybrowne at verizon.net> wrote:

> I just replaced my main on hull #935 and kept the original as a delivery
> sail. You're welcome to borrow it until your new sail gets here. Redondo
> beach is closer than Woodland hills, but it is ten years old. New Quantum
> racing Dacron main is only about 1000 times better, but it takes 5 weeks to
> get one.
> 
> DENNY BROWNE
> ____________________________
> A Cappella #935
> Redondo Beach, CA
> Denny at DennyBrowne.com
> 310-408-9591
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Ted Barto
> Sent: Saturday, August 24, 2013 11:18 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Need new sails
> 
> Pacific Sails has a factory main in good shape for $999 it's on E-bay, just
> search for 320 sail. It was numbered #889 I think there may have been a
> change in boom length around 2000 so be sure to check the foot length. I've
> dealt with Ullman in Newport and been to their loft, doubt if there are any
> laying around in stock. Call Ullman Ventura, I believe they make sails for
> Catalina Direct and may have some, also Doyle builds Catalina sails for
> Catalinaowners.com check with them for in-stock. Good Luck Ted #880 "NancyB"
> 
> -----Original Message-----
> From: Rick From Inflate Co
> Sent: Friday, August 23, 2013 5:44 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Need new sails
> 
> Is there a snowballs chance in hell that I can get them somewhere in stock
> in S.  California today? I know Catalina is in woodland hills (80 miles from
> me), I wonder if they have them or do they manufacture out if Florida now? 
> Also, Ulman sails is in San Diego (also close ) and I think they manufacture
> for Catalina.
> 
> Thank you and please excuse any grammatical and/or  typographical  as sent
> from iPhone.
> 
> Rick Portanova | President | CEO
> INFLATE CO, INC.
> www.InflateCo.com
> 949-340-0104 Office
> 
> 
> On Aug 23, 2013, at 5:33 AM, "Chris Descher" <cdescher at cedtulsa.com> wrote:
> 
>> I replaced mine this year.  Went with Mack loose footed main, Mack 
>> Pack, and
>> 135 furling jib.  They're nice.  I really like the Mack Pack.
>> 
>> Chris Descher
>> #500
>> 
>> -----Original Message-----
>> From: c320-list-bounces at lists.catalina320.com
>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Rick 
>> From Inflate Co
>> Sent: Thursday, August 22, 2013 10:12 PM
>> To: C320-List at Catalina320.com
>> Subject: [C320-list] Need new sails
>> 
>> I need new main and new furling head sail . Main ripped completely 
>> leech to luff today. Original sails from hull #235 , 1995.
>> 
>> Does anyone have any recommendations as to good replacement, and what 
>> about those cool grey Kevlar looking sails I see lately?
>> 
>> Any help is super appreciated .
>> 
>> Rick Portanova
>> NEMO
>> Dana Point , CA
>> #235
> 
> 
>