[C320-list] Galley counter space

[millers1 at aol.com]

The cook has noted it is a bit tight working with the counter space on the C320.
Has anyone added a drop-down counter to the right side of the sink, that could fold down and 
be out of the way when not in use.  
Thanks,
               Art,   2000   #680


-----Original Message-----
From: Colin Evans <twosailors at bigpond.com>
To: C320-List <C320-List at Catalina320.com>
Sent: Sun, Aug 25, 2013 5:32 pm
Subject: Re: [C320-list] Martec Folding Prop


According to my information sheet , standard fixed props are 15x9 three
blade or 15 x 10 two blade, so a 14 should fit.
But beware that if the diameter is too small then the engine will be
screaming and you won`t be going anywhere. 

*************************
Regards
Colin Evans
Watermark 
2000 C320 # 774 
Lake Macquarie, Australia
 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Tim Fleming
Sent: Monday, 26 August 2013 7:25 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Martec Folding Prop

Hope you have a SS shaft as the original brass could bend on weight of the
maritech.  
Tim

On Aug 25, 2013, at 12:39 PM, "Jeffrey Brown" <oceanblues at mac.com> wrote:

Anyone know the clearance dimension on the prop? Looking at buying a used
Martec and they have 12" and 14", not sure if the 14" will fit. Any other
advice is appreciated. 

Jeff Brown
949-350-5123