[C320-list] Galley counter space
Dingo Is Talent
dingoistalent at bigpond.com
Sun Aug 25 16:56:43 PDT 2013
We made up 2 x cutting boards that fit into both sinks... doubles the bench
space.
Would you like me to take photos and send
RON
1150
Perth WESTERN AUSTRALIA
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Cary Dennis
Lowe
Sent: Monday, 26 August 2013 7:10 AM
To: C320-List at Catalina320.com
Cc: C320-List at Catalina320.com
Subject: Re: [C320-list] Galley counter space
We had a cutting board made that fits over the starboard side sink.
Sent from my iPad
On Aug 25, 2013, at 3:25 PM, millers1 at aol.com wrote:
>
> The cook has noted it is a bit tight working with the counter space on the
C320.
> Has anyone added a drop-down counter to the right side of the sink,
> that could fold down and be out of the way when not in use.
> Thanks,
> Art, 2000 #680
>
>
> -----Original Message-----
> From: Colin Evans <twosailors at bigpond.com>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Sun, Aug 25, 2013 5:32 pm
> Subject: Re: [C320-list] Martec Folding Prop
>
>
> According to my information sheet , standard fixed props are 15x9
> three blade or 15 x 10 two blade, so a 14 should fit.
> But beware that if the diameter is too small then the engine will be
> screaming and you won`t be going anywhere.
>
> *************************
> Regards
> Colin Evans
> Watermark
> 2000 C320 # 774
> Lake Macquarie, Australia
>
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Tim
> Fleming
> Sent: Monday, 26 August 2013 7:25 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Martec Folding Prop
>
> Hope you have a SS shaft as the original brass could bend on weight of
> the maritech.
> Tim
>
> On Aug 25, 2013, at 12:39 PM, "Jeffrey Brown" <oceanblues at mac.com> wrote:
>
> Anyone know the clearance dimension on the prop? Looking at buying a
> used Martec and they have 12" and 14", not sure if the 14" will fit.
> Any other advice is appreciated.
>
> Jeff Brown
> 949-350-5123
>
>
>
More information about the C320-list
mailing list