[C320-list] Galley counter space
Dingo Is Talent
dingoistalent at bigpond.com
Sun Aug 25 20:20:20 PDT 2013
May take a few days
send me your private email address to dingoistalent at bigpond.com
CHEERs
Ron 'Down Under'
1150
-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Arthur Miller
Sent: Monday, 26 August 2013 9:02 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Galley counter space
Ron, the previous owner did install a cutting board on the left sink. Send
the photo's of you Arrangement it may work better.
Thanks,
Art. Liberty. #680
Sent from my iPad
On Aug 25, 2013, at 7:56 PM, "Dingo Is Talent" <dingoistalent at bigpond.com>
wrote:
> We made up 2 x cutting boards that fit into both sinks... doubles the
> bench space.
> Would you like me to take photos and send
>
> RON
> 1150
> Perth WESTERN AUSTRALIA
>
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Cary
> Dennis Lowe
> Sent: Monday, 26 August 2013 7:10 AM
> To: C320-List at Catalina320.com
> Cc: C320-List at Catalina320.com
> Subject: Re: [C320-list] Galley counter space
>
> We had a cutting board made that fits over the starboard side sink.
>
>
> Sent from my iPad
>
> On Aug 25, 2013, at 3:25 PM, millers1 at aol.com wrote:
>
>>
>> The cook has noted it is a bit tight working with the counter space
>> on the
> C320.
>> Has anyone added a drop-down counter to the right side of the sink,
>> that could fold down and be out of the way when not in use.
>> Thanks,
>> Art, 2000 #680
>>
>>
>> -----Original Message-----
>> From: Colin Evans <twosailors at bigpond.com>
>> To: C320-List <C320-List at Catalina320.com>
>> Sent: Sun, Aug 25, 2013 5:32 pm
>> Subject: Re: [C320-list] Martec Folding Prop
>>
>>
>> According to my information sheet , standard fixed props are 15x9
>> three blade or 15 x 10 two blade, so a 14 should fit.
>> But beware that if the diameter is too small then the engine will be
>> screaming and you won`t be going anywhere.
>>
>> *************************
>> Regards
>> Colin Evans
>> Watermark
>> 2000 C320 # 774
>> Lake Macquarie, Australia
>>
>>
>> -----Original Message-----
>> From: c320-list-bounces at lists.catalina320.com
>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Tim
>> Fleming
>> Sent: Monday, 26 August 2013 7:25 AM
>> To: C320-List at Catalina320.com
>> Subject: Re: [C320-list] Martec Folding Prop
>>
>> Hope you have a SS shaft as the original brass could bend on weight
>> of the maritech.
>> Tim
>>
>> On Aug 25, 2013, at 12:39 PM, "Jeffrey Brown" <oceanblues at mac.com> wrote:
>>
>> Anyone know the clearance dimension on the prop? Looking at buying a
>> used Martec and they have 12" and 14", not sure if the 14" will fit.
>> Any other advice is appreciated.
>>
>> Jeff Brown
>> 949-350-5123
>>
>>
>>
>
More information about the C320-list
mailing list