[C320-list] Galley counter space

[Bruce Heyman]

Have a cutting board that covers the stove as well.  When I lived on ours for six months I found that I could also wedge the board on the top companion way step and increase my food preparation area.

Bruce Heyman
(949) 289-8400

Cary Dennis Lowe <cdlowe1769 at sbcglobal.net> wrote:

>Great idea!
>
>Sent from my iPad
>
>On Aug 25, 2013, at 4:58 PM, Denny Browne <dennybrowne at verizon.net> wrote:
>
>> I know a previous owner who had a cutting board made to fit completely over the range, with a couple of small feet that kept it from slipping around. It easily fit vertically behind the range when he used the burners. I've been planning to do that... for ten years now...
>> 
>> Denny Browne
>> 310.408.9591
>> 
>> Sent from iPhone, sorry for typos, grammar, etc...
>> 
>> On Aug 25, 2013, at 4:09 PM, Cary Dennis Lowe <cdlowe1769 at sbcglobal.net> wrote:
>> 
>>> We had a cutting board made that fits over the starboard side sink.
>>> 
>>> 
>>> Sent from my iPad
>>> 
>>> On Aug 25, 2013, at 3:25 PM, millers1 at aol.com wrote:
>>> 
>>>> 
>>>> The cook has noted it is a bit tight working with the counter space on the C320.
>>>> Has anyone added a drop-down counter to the right side of the sink, that could fold down and 
>>>> be out of the way when not in use.  
>>>> Thanks,
>>>>             Art,   2000   #680
>>>> 
>>>> 
>>>> -----Original Message-----
>>>> From: Colin Evans <twosailors at bigpond.com>
>>>> To: C320-List <C320-List at Catalina320.com>
>>>> Sent: Sun, Aug 25, 2013 5:32 pm
>>>> Subject: Re: [C320-list] Martec Folding Prop
>>>> 
>>>> 
>>>> According to my information sheet , standard fixed props are 15x9 three
>>>> blade or 15 x 10 two blade, so a 14 should fit.
>>>> But beware that if the diameter is too small then the engine will be
>>>> screaming and you won`t be going anywhere. 
>>>> 
>>>> *************************
>>>> Regards
>>>> Colin Evans
>>>> Watermark 
>>>> 2000 C320 # 774 
>>>> Lake Macquarie, Australia
>>>> 
>>>> 
>>>> -----Original Message-----
>>>> From: c320-list-bounces at lists.catalina320.com
>>>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Tim Fleming
>>>> Sent: Monday, 26 August 2013 7:25 AM
>>>> To: C320-List at Catalina320.com
>>>> Subject: Re: [C320-list] Martec Folding Prop
>>>> 
>>>> Hope you have a SS shaft as the original brass could bend on weight of the
>>>> maritech.  
>>>> Tim
>>>> 
>>>> On Aug 25, 2013, at 12:39 PM, "Jeffrey Brown" <oceanblues at mac.com> wrote:
>>>> 
>>>> Anyone know the clearance dimension on the prop? Looking at buying a used
>>>> Martec and they have 12" and 14", not sure if the 14" will fit. Any other
>>>> advice is appreciated. 
>>>> 
>>>> Jeff Brown
>>>> 949-350-5123
>>>> 
>>>> 
>>>>