[C320-list] Rubb rail 1993,#3

[Jerry Brown]

i have a much later boat but found that Vaseline and a rubber mallet worked 
once the rub rail had been removed to the point of the bulge and then put 
back in

Jerry
Indigo #1137

-----Original Message----- 
From: Warren Updike
Sent: Monday, January 14, 2013 5:06 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Rubb rail 1993,#3

Yes, ours drops out from time to time, especially after I've rubbed a piling
or another boat.  I can put it back in with a slap from the heal of my hand;
but, a rubber mallet should do the trick if the fit is tighter.

-----Original Message-----
From: David Nolte [mailto:dcnolte at mac.com]
Sent: Sunday, January 13, 2013 9:34 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Rubb rail 1993,#3

Hi Dick,

How far did it come out? Can you work it back in?  Mine slips out in lengths
of 3-8 feet or so near the stern from time to time & I just work it back in.
I'm the one after yours!

Warren, you are of our vintage, do you have any insights?

Dick, please feel free to email me & we can compare - dcnolte at mac.com

David Nolte
Beach House #4



On Jan 13, 2013, at 6:44 PM, Richard Wotruba wrote:

>
> Recently had port side rubb rail come out of track.Do I have to take
> entire rail off(starboard side )to re install?I tried to put port back
> in track by hair dryer,but it did not work>we are hull no.3
> 1993.Thanks dick,Santa barbara Sent from my iPad