[C320-list] Table berth
William Ott
wmo48 at yahoo.com
Sat Jul 6 06:59:30 PDT 2013
Look and see if the metal ring has threaded hole. I believe someone has removed your black plastic knob and not replaced it.
Mike Ott
'Amanda Lu'
#508
Sent from my iPad
On Jul 6, 2013, at 8:13 AM, "Brian/Carol McLamb" <bjcnmclamb at gmail.com> wrote:
> On mine it is a black plastic knob. It is almost triangular in shape and
> is mounted on the center facing side of the pedestal. It needs to be very
> firm, so I have to be on hands and knees to get enough leverage to make it
> turn when loosening or tightening. Hope this helps.
>
> Brian s/v Serenity #1075.
>
>
> On Fri, Jul 5, 2013 at 10:33 PM, John Ellis <jr_ellis100 at hotmail.com> wrote:
>
>> So here's my dumb question - Where is the lock nut and how do I make it
>> loose? There is a metal ring part way up the center tube that looks like it
>> should rotate to unlock, but I can't make it move in either direction.
>> John
>> #271
>>
>>> From: wmo48 at yahoo.com
>>> Date: Thu, 4 Jul 2013 13:13:46 -0400
>>> To: C320-List at Catalina320.com
>>> Subject: Re: [C320-list] Table berth
>>>
>>> Make sure the lock nut knob is loose, then slam the top of top table
>> above the post, with your hand. Sounds weird but it has something to do
>> releasing the pressure inside the center tube.
>>> Mike Ott
>>> 'Amanda Lu'
>>> #508
>>>
>>> Sent from my iPad
>>>
>>> On Jul 4, 2013, at 1:04 PM, Bill Hutt <bhutt at windstream.net> wrote:
>>>
>>>> Happy Independence Day!
>>>> Quick question; I can't get the table to drop down. Any ideas?
>>>> Thanks,
>>>> Bill Hutt
>>>>
>>>>
>>>> Sent from my iPhone
>>
More information about the C320-list
mailing list