[C320-list] Kiwi Prop

[Colin Evans]

Yes John I agree BUT the Kiwis, in their infinite wisdom, set these things
to degrees. See the second page of :-

 http://www.kiwiprops.co.nz/cms/images/stories/kiwiprops/pdf/k3om-2.pdf

They say that 21 degrees is approx 11 to 12 inches pitch

If I buy the second hand one then it will be sent to the Australian dealer
for re-furbishment.


*************************
Regards
Colin Evans
Watermark 
2000 C320 # 774 
Lake Macquarie, Australia
 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of JJ Morrison
Sent: Wednesday, 5 June 2013 8:56 AM
To: Catalina List
Subject: Re: [C320-list] Kiwi Prop

I don't know of any propeller manufacturer which gives pitch in degrees.
They are always in inches so a 16.5X11RH prop is 16.5 inches in diameter;has
an 11 inch pitch (which means that for each rotation the propellor will
travel 11inches through the water, disregarding slip) and has a right hand
rotation.CheersJohnM1999#574

> From: twosailors at bigpond.com
> To: C320-List at Catalina320.com
> Date: Wed, 5 Jun 2013 07:47:54 +1000
> Subject: [C320-list] Kiwi Prop
> 
> I`ve been offered a second hand Kiwi Prop, supposedly off a Catalina 350,
> but the suppliers say it was for a Yanmar GM30, 16.5" diameter, RH
> direction, 2.62 gearbox reduction and 1' shaft..  The C350 has a 35hp
> Universal engine.
> Those of you who have the Kiwi Prop.  What diameter and pitch is it.
We`ve
> looked at various info on the C320 site but couldn`t find the size.
> I know they don`t give the pitch in inches, but degrees.
> The local supplier suggest a 16 inch diameter by 20 degrees for the 2.21
> reduction gearbox. It would mean cutting 1/4 inch off the blades.
> Apparently no problem.
> The good thing with the Kiwi is the weight.  I won`t have to change from
> bronze to a stainless shaft.
>  
> *************************
> Regards
> Colin Evans
> Watermark 
> 2000 C320 # 774 
> Lake Macquarie, Australia