[C320-list] Fuel Assembly Question

[John Zienda]

Fred,
Can you share your new LED fuel gauge info?

Thanks,

John Z.
691

On Jun 17, 2013, at 9:29 AM, Fred LEcuyer <fred.lecuyer at live.com> wrote:

> I just did this replacement. Here's what I ordered.
> 
> SSS/SSL09.0 SSS/SSL Diesel, Fuel or Water Level Sensor (4 - 60 in.)
> Length: Length - 9.0 in. 
> 
> I did it on the hard with a full fuel tank.... still a mess as the boat was not perfectly level. If you're in the water, half a tank or less of fuel would minimize any potential spillage inside your boat.
> 
> I also changed the fuel gauge to an LED version and am happy with the result.
> 
> Fred
> 
> First Light #960
> 
> 
>> From: summerwind3 at comcast.net
>> Date: Sun, 16 Jun 2013 18:43:57 -0400
>> To: C320-List at Catalina320.com
>> Subject: Re: [C320-list] Fuel Assembly Question
>> 
>> I seem to remember this issue raised last year and it was suggested that there is a newer vertical version of the fuel assembly unit available.  Does anybody know anything about this?
>> 
>> On Jun 16, 2013, at 4:50 PM, "Rick Sulewski" <rsulewski at bex.net> wrote:
>> 
>>> Joe,
>>> West Marine and most other marine stores have a universal fuel sender unit (
>>> less than $40). On the install, just need to match the length and angle of
>>> the float assembly to match the OME float assembly length and angle so the
>>> new fuel sender unit will pivots to match the old unit.
>>> Rick
>>> 1995 320 #277
>>> 
>>> -----Original Message-----
>>> From: c320-list-bounces at lists.catalina320.com
>>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Joseph R
>>> Aberdale
>>> Sent: Sunday, June 16, 2013 4:42 PM
>>> To: C320-List at Catalina320.com
>>> Subject: [C320-list] Fuel Assembly Question
>>> 
>>> I need to replace the fuel indicator float mechanism in my fuel tank. Can
>>> you recommend a model, brand and vendor to purchase it from?
>>> 
>>> Also, I washed my boat with boat soap but still have some mildew left.  Can
>>> you recommend a solution or product to remove the mildew without harming the
>>> fiberglass?
>>> 
>>> Thanks very much.
>>> 
>>> Joe Aberdale
>>> #908
>