[C320-list] Fuel Assembly Question
Joseph R Aberdale
summerwind3 at comcast.net
Tue Jun 18 06:02:19 PDT 2013
I am ordering the sensor from WEMUSA. I will be using the existing needle gauge and they need to know the ohm rating. It's either 240-33 or 0-180. Can somebody tell me what the ohm rating would be for the existing needle gauge?
Thanks very much.
Joe Aberdale
#908
On Jun 17, 2013, at 1:15 PM, Fred LEcuyer <fred.lecuyer at live.com> wrote:
> I ordered both parts from www.WEMUSA.com .
>
>
> Here's the info on both parts:
>
> UDFR-BB-240-33 LED Fuel Level Gauge
> $29.99 x 1
> $29.99
>
>
>
>
>
>
>
>
>
>
>
>
>
> SSS/SSL09.0 SSS/SSL Diesel, Fuel or Water Level Sensor (4 - 60 in.)
> Length: Length - 9.0 in. - $3.00
> $43.00 x 1
> $43.00
>
> Fred
>
>
>
>> From: jzienda at sbcglobal.net
>> Date: Mon, 17 Jun 2013 11:34:33 -0500
>> To: C320-List at Catalina320.com
>> Subject: Re: [C320-list] Fuel Assembly Question
>>
>> Fred,
>> Can you share your new LED fuel gauge info?
>>
>> Thanks,
>>
>> John Z.
>> 691
>>
>> On Jun 17, 2013, at 9:29 AM, Fred LEcuyer <fred.lecuyer at live.com> wrote:
>>
>>> I just did this replacement. Here's what I ordered.
>>>
>>> SSS/SSL09.0 SSS/SSL Diesel, Fuel or Water Level Sensor (4 - 60 in.)
>>> Length: Length - 9.0 in.
>>>
>>> I did it on the hard with a full fuel tank.... still a mess as the boat was not perfectly level. If you're in the water, half a tank or less of fuel would minimize any potential spillage inside your boat.
>>>
>>> I also changed the fuel gauge to an LED version and am happy with the result.
>>>
>>> Fred
>>>
>>> First Light #960
>>>
>>>
>>>> From: summerwind3 at comcast.net
>>>> Date: Sun, 16 Jun 2013 18:43:57 -0400
>>>> To: C320-List at Catalina320.com
>>>> Subject: Re: [C320-list] Fuel Assembly Question
>>>>
>>>> I seem to remember this issue raised last year and it was suggested that there is a newer vertical version of the fuel assembly unit available. Does anybody know anything about this?
>>>>
>>>> On Jun 16, 2013, at 4:50 PM, "Rick Sulewski" <rsulewski at bex.net> wrote:
>>>>
>>>>> Joe,
>>>>> West Marine and most other marine stores have a universal fuel sender unit (
>>>>> less than $40). On the install, just need to match the length and angle of
>>>>> the float assembly to match the OME float assembly length and angle so the
>>>>> new fuel sender unit will pivots to match the old unit.
>>>>> Rick
>>>>> 1995 320 #277
>>>>>
>>>>> -----Original Message-----
>>>>> From: c320-list-bounces at lists.catalina320.com
>>>>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Joseph R
>>>>> Aberdale
>>>>> Sent: Sunday, June 16, 2013 4:42 PM
>>>>> To: C320-List at Catalina320.com
>>>>> Subject: [C320-list] Fuel Assembly Question
>>>>>
>>>>> I need to replace the fuel indicator float mechanism in my fuel tank. Can
>>>>> you recommend a model, brand and vendor to purchase it from?
>>>>>
>>>>> Also, I washed my boat with boat soap but still have some mildew left. Can
>>>>> you recommend a solution or product to remove the mildew without harming the
>>>>> fiberglass?
>>>>>
>>>>> Thanks very much.
>>>>>
>>>>> Joe Aberdale
>>>>> #908
>>>
>
More information about the C320-list
mailing list