[C320-list] Head tank Smells??

[tharrison at innovations-plus.com]

9 feet rings a bell. The tank cost me just over 200 dollars. 



Sent from my iPhone

On 2013-10-13, at 4:20 PM, dprudden <dprudden at comcast.net> wrote:

> Ted,
> I plan on replacing the head/holding tank hoses next spring, but I forgot to measure lengths and Diameter of the hoses after I just finished winterizing yesterday. Do you recall the hose dimensions you needed?
> 
> Thanks,
> David Prudden
> #787
> 
> Sent from my iPhone
> 
>> On Oct 13, 2013, at 10:12 AM, "tharrison at innovations-plus.com" <tharrison at innovations-plus.com> wrote:
>> 
>> I did replace the vent hose. 
>> 
>> Take the mirror cabinet off - 4 screws. Wiggle out 
>> 
>> Then take the two pieces of wood in the  shelf. 6 screws 
>> 
>> Then take the board off the 4 screws. This one is a tight fit but take it easy and it comes out. 
>> 
>> The vent is top left . The previous owner cut a little access hole. 
>> 
>> It was not that bad for me to replace the  black hoses with high quality white hoses. 
>> 
>> Tank flips out in a clockwise direction. I cut the hides and ducked taped ends to avoid addition leakage. 
>> 
>> Ted - hull 424
>> 905 430 3365 if you want to talk. - Canada 
>> 
>> Sent from my iPhone
>> 
>>> On 2013-10-13, at 9:16 AM, millers1 at aol.com wrote:
>>> 
>>> 
>>> I recently purchased a C320 , 2000, hull  #680, and plan to try and eliminate the holding tank smell and possible 
>>> problems discussed below:
>>> What I know:  All the tank hoses appear to be up-graded to the "Black Hose" except for the vent 
>>>                    hose.  Did the C320 come with black hoses or white?
>>>                     The macerator will allow leakage back into the tank.  Concur the hull valve should                    
>>>                     always be shut for compliance.
>>>                     I have an in tank "rod/float" that provides some info on the fullness of the tank.
>>>                     Because the tank is lower than the head, the head slowly drains to the tank (the 
>>>                      head pump "one way valves" are not zero leakage). So the ultimate indication of