[C320-list] Cabin light fitting replacements?

[rross at pillerross.com]

   Sent from my BlackBerry 10 smartphone.

   From: Bruce Heyman
   Sent: Thursday, September 5, 2013 10:18 AM
   To: C320-List at Catalina320.com
   Reply To: C320-List at Catalina320.com
   Subject: Re: [C320-list] Cabin light fitting replacements?

   John,
   Did you try the warm white/red bulb? Was it bright enough in warm white
   mode. Looks like the two color bulb only as 9 let's total.
   Thanks,
   Bruce
   Somerset Dana Point
   Bruce Heyman
   (949) 289-8400
   John Ellis <jr_ellis100 at hotmail.com> wrote:
   >I replaced all of mine with new LED fixtures from Marinebeam:
   >http://store.marinebeam.com/g4-12v24v-fixture-with.html
   >
   >The warm white LEDs are very bright and draw a fraction of the current
   of the original bulbs.
   >
   >John
   >#271
   >
   >> From: rick at inflateco.com
   >> Date: Wed, 4 Sep 2013 17:28:57 -0700
   >> To: C320-List at Catalina320.com
   >> Subject: Re: [C320-list] Cabin light fitting replacements?
   >>
   >> I have those same round lights , hull 235, did the led fit ?
   >>
   >> Thank you and please excuse any grammatical and/or typographical as
   sent from iPhone.
   >>
   >> Rick Portanova | President | CEO
   >> INFLATE CO, INC.
   >> www.InflateCo.com
   >> 949-340-0104 Office
   >>
   >>
   >> On Sep 4, 2013, at 5:04 PM, Dick Walker <dickwalker at att.net> wrote:
   >>
   >> > In my 2000 I replaced them all with LED lights
   >> >
   >> > Cheers
   >> >
   >> > Dick Walker
   >> > 740 Olive Ave.
   >> > Coronado ,CA 92118
   >> > 619.435.8986
   >> >
   >> >
   >> >
   >> > On Sep 4, 2013, at 14:21, Graeme Clark <cg at skyflyer.co.uk> wrote:
   >> >
   >> >> our 1996 320, #303 has circular cabin light fittings with a white
   plastic outer ring which is a push-fit to hold the clear lens in place.
   Many of these rings have cracked which means as well as being unsightly
   the lens falls out from time to time!
   >> >>
   >> >> Is there a simple to sourced straight replacement anyone can
   recommend which won't involve any/much resizing the hole?
   >> >>
   >> >> Thanks
   >> >> Graeme
   >> >>
   >>
   >