[C320-list] Galley counter space

[millers1 at aol.com]

Nice work Jeff, thanks.... I have this Winter to work on the project.


-----Original Message-----
From: Jeff Hare <catalina at thehares.com>
To: C320-List <C320-List at Catalina320.com>
Sent: Thu, Sep 5, 2013 8:53 pm
Subject: Re: [C320-list] Galley counter space


Here's our solution.  I whipped this up in the shop and it works really
well.  Also made one for the Amanda Rose out of some different woods.
They're sealed with salad bowl oil finish.

http://www.catalina320.com/mediagallery/album.php?aid=144


-Jeff 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of
millers1 at aol.com
Sent: Sunday, August 25, 2013 6:25 PM
To: C320-List at Catalina320.com
Subject: [C320-list] Galley counter space


The cook has noted it is a bit tight working with the counter space on the
C320.
Has anyone added a drop-down counter to the right side of the sink, that
could fold down and be out of the way when not in use.  
Thanks,
               Art,   2000   #680


-----Original Message-----
From: Colin Evans <twosailors at bigpond.com>
To: C320-List <C320-List at Catalina320.com>
Sent: Sun, Aug 25, 2013 5:32 pm
Subject: Re: [C320-list] Martec Folding Prop


According to my information sheet , standard fixed props are 15x9 three
blade or 15 x 10 two blade, so a 14 should fit.
But beware that if the diameter is too small then the engine will be
screaming and you won`t be going anywhere. 

*************************
Regards
Colin Evans
Watermark 
2000 C320 # 774 
Lake Macquarie, Australia
 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Tim Fleming
Sent: Monday, 26 August 2013 7:25 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Martec Folding Prop

Hope you have a SS shaft as the original brass could bend on weight of the
maritech.  
Tim

On Aug 25, 2013, at 12:39 PM, "Jeffrey Brown" <oceanblues at mac.com> wrote:

Anyone know the clearance dimension on the prop? Looking at buying a used
Martec and they have 12" and 14", not sure if the 14" will fit. Any other
advice is appreciated. 

Jeff Brown
949-350-5123