[C320-list] Traveler line

[Jeffrey Brown]

Alan,
Thanks for the advice.  I do see the set screws but unfortunately both are sheared off and will require getting them out with some sort of tool.  I'm hopeful they will come out without having to drill them out and rethread.  Thanks for the input, I can see it now that I look closer.  Our boats must have been sitting next to each other during construction. :) 

Jeff Brown
"Out of the blue" Dana Point, CA
Hull 78
(949) 350-5123
oceanblues at mac.com




On Sep 17, 2013, at 12:05 PM, Alan Goodman <goodmanalanlee at hotmail.com> wrote:

> Jeff - you don't identify your hull number (always a good thing to do), but in the older boats (I have hull #67) there in no need to disassemble the traveler unit.  The contoll lines do indeed go inside the port and starboard ends of the car, but only for an inch or so and a set screw traps each one inch stub.  no splicing or disassembly required.  Alan  hull #67 Holland MI
> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Sun, 15 Sep 2013 14:01:24 -0700
>> From: Jeffrey Brown <oceanblues at mac.com>
>> To: Catalina C320 List <C320-List at Catalina320.com>
>> Subject: [C320-list] Traveler line
>> Message-ID: <93C11407-007F-470B-9022-76DBEB4A9C7A at mac.com>
>> Content-Type: text/plain; charset=us-ascii
>> 
>> Anyone know how to take apart the traveler so I can change the lines on it? Both ends of the line go inside the unit and just checking before I unbolt the whole thing. 
>> 
>> Jeff Brown
>> 949-350-5123
>> 
>> ------------------------------
> 
>