[C320-list] Yanmar issue
wflowe3 at aim.com
wflowe3 at aim.com
Fri Apr 25 10:11:59 PDT 2014
Mine runs about 165 too
-----Original Message-----
From: clburti <clburti at gmail.com>
To: 320 <C320-List at Catalina320.com>
Sent: Tue, Apr 22, 2014 9:12 pm
Subject: Re: [C320-list] Yanmar issue
I don’t know why those maintenance tasks would make it run 20 degrees cooler,
but ours has always run at about 165 degrees.
Fair Winds
Chris Burti
Commitment
Catalina 320, #867
From: dprudden at comcast.net
Sent: Tuesday, April 22, 2014 9:22 PM
To: 320
Just finished getting the 3gm30f ready fir the summer. I changed the oil,all
filters, impeller, mixing elbow, belts, thermostat and flushed and changed the
coolant. I had the heat exchanger ultrasonically cleaned and replaced the
gaskets (yanmar has a new distributor and the bar gaskets on the exchanger now
need to be cut to fit...the don't give you the right length anymore).
So here's the question-I ran the engine today for 1/2 hour, using cold tap
water to circulate for raw water. The engine wouldn't heat past 165 degrees.
Last year the temp was a steady 185. Would the maintenance I performed,
especially the heat exchanger cleaning (which wasn't bad before the cleaning),
cause her to run 20 degrees cooler? Could cold tap water just make it tough to
get hot?
Thanks for any suggestions.
David Prudden
#787
More information about the C320-list
mailing list