[C320-list] circuit breaker

[Danny Jensen]

The fuse I believe is on the port side on top of the motor itegrated in the harness yamar 3gm30f pn 46150-003680 30 amp. See 320 web site for schematic in maintenance manual. It is red wire providing power to key switch then push button starter tied to white starter wire.

Sent from my iPhone

> On Aug 9, 2014, at 5:31 PM, "jsheets at aol.com" <jsheets at aol.com> wrote:
> 
> Good information. Thanks all.  Will discuss these points with mechanic this week. 
> 
> Jerry 
> 
>> On Aug 9, 2014, at 8:04 PM, Martin Rosenberg <martinlrosenberg at gmail.com> wrote:
>> 
>> The Yanmar 2GM20F I had in my Pearson 303 had an inline 30 amp fuse. The
>> plastic case around it also held a spare. I simply can't imagine the logic
>> for the expense of installing a circuit breaker.
>> Martin Rosenberg
>> #823  Avalon
>> 
>> 
>> On Sat, Aug 9, 2014 at 7:40 PM, tharrison at innovations-plus.com <
>> tharrison at innovations-plus.com> wrote:
>> 
>>> I think the same - there maybe a fuse in the line.
>>> 
>>> I did help with a NonSuch this year and it did have a breaker.
>>> 
>>> Sent from my iPhone
>>> 
>>>> On Aug 9, 2014, at 1:54 PM, Warren <wupdike at hotmail.com> wrote:
>>>> 
>>>> Of course our #62 is 8 yrs older so take this for what it's worth: A
>>>> breaker in the starting circuit??? Where would that be? The wire from the
>>>> start switch goes to a relay on the starter. I don't think there is a
>>>> breaker in that circuit on our boat.
>>>> 
>>>>> On Friday, August 8, 2014 5:21:23 PM UTC-4, jsh... at aol.com wrote:
>>>>> 
>>>>> 
>>>>> Due to an electrical problem (maybe a lightening strike, can't be sure),
>>>>> my mechanic has suggested rerouting the starter so that it does not run
>>> to
>>>>> the breaker. He also suggests that the breaker is now weakened and
>>> should
>>>>> be replaced. She's a 2002, hull number 890. Over my head. Does this make
>>>>> sense, and if so, has anyone replaced the circuit breaker? Any
>>> suggestions
>>>>> as to types and manufacturers?
>>>>> Thanks as always to the group for your input.
>>>>> 
>>>>> Jerry
>