[C320-list] Best place to attach cockpit radio extension mic
Jeff Hare
Catalina at thehares.com
Sun Jun 1 07:58:42 PDT 2014
Hi Mark,
We installed the AFI Cockpit table (with some modifications) and mounted our RAM Mic to it.
See our C320 gallery: http://bit.ly/1wNsGN7
We added the RAM Mic connector and a spare 12V plug here:
http://bit.ly/1gTj0eY
We find it convenient enough and the cord says out of the way.
Cheers!
-Jeff
-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Mark Gillingham
Sent: Thursday, May 29, 2014 5:50 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Best place to attach cockpit radio extension mic
Thanks, Dick, Allan, and Arthur, for your advice. I'll take another look at the pod and locker areas to see if I can fix a better location. I'll let you know.
Speakeasy #612
Mark Gillingham | gplus.to/MarkGillingham | Support a struggling student<http://101010scholarship.info>
| Harbor-To-Harbor Blog <http://www.loftnet.com> | Speakeasy Photos<http://picasaweb.google.com/mark.gillingham>
On Wed, May 28, 2014 at 8:16 PM, Arthur Miller <millers1 at aol.com> wrote:
> Mike, the PO drilled a hole just the size of the mike in the side of
> the port locker. There Is a "plastic finger's" device that holds it
> and stores the mic in the locker. The hole is round, the mike has a
> square head. You reach down and pull the mike out to use. I can hear
> it fairly well when Stored. If a picture would help let me know.
> Art
> Liberty
> #680
>
> Sent from my iPad
>
> On May 28, 2014, at 8:22 PM, Mark Gillingham <markgill at uwalumni.com>
> wrote:
>
> > I attached an extension mic in the cockpit on port just between the
> > lids for the propane well and the settee. That's not too bad for the
> > the helmsman, but is in the way of crew working or sitting nearby.
> > Before the end of the first season a crewman kicked the connector
> > and rendered it useless.
> >
> > I've considered moving it to the instrument pod, but it is very
> > difficult to get around the wheel to get to the mic. I think my best
> > move is to
> leave
> > it where it is and reinforce or add a shield do the connector.
> >
> > What have others done?
> >
> > Speakeasy #612
> >
> > Mark Gillingham | gplus.to/MarkGillingham | Support a struggling
> > student<http://101010scholarship.info>
> > | Harbor-To-Harbor Blog <http://www.loftnet.com> | Speakeasy
> > Photos<http://picasaweb.google.com/mark.gillingham>
>
More information about the C320-list
mailing list