[C320-list] Tension settings for shrouds

[wflowe3 at aim.com]

Has anyone installed a back stay tensioner on a boat with in-mast furling? If so, do you get much benefit, if not, does the group think there would be much benefit?
Thanx
Bill  #1146
 
 
-----Original Message-----
From: argates2nd <argates2nd at comcast.net>
To: C320-List <C320-List at Catalina320.com>
Sent: Fri, May 16, 2014 3:46 am
Subject: Re: [C320-list] Tension settings for shrouds


I pull the line back thru the sheaves to make slack and it recedes.
Rollie.    # 182


Sent from my Verizon Wireless 4G LTE smartphone

<div>-------- Original message --------</div><div>From: aronella at gmail.com 
</div><div>Date:05/15/2014  11:08 PM  (GMT-05:00) </div><div>To: 
C320-List at Catalina320.com </div><div>Subject: Re: [C320-list] Tension settings 
for shrouds </div><div>
</div>I also added a back stay adjuster, with 2 sheaves on each side (total of 4 
sheaves). I can't get the adjuster to slide back up when the cam cleat is 
released. What am I missing?
Lou Spitz
#195 Merry Chase
Nyack, NY

Sent from my iPad

> On May 12, 2014, at 4:14 PM, <tharrison at innovations-plus.com> wrote:
> 
> Allan, thanks for the reply. I found the below settings. But he changed the
> forestay and added a backstay adjuster. Are the setting below correct?
> 
> Cap stays-PT-3 gauge18
> D1 forward stays-PT-2 gauge 31
> D1 aft stays-PT-2 gauge 16
> D2 stays-PT-2 gauge 18.5
> 
> Ted
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
> Of Allan S Field
> Sent: May-12-14 3:54 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Tension settings for shrouds
> 
> See:  http://www.catalina320.com/article.php?story=20040828173431380
> 
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
> Of tharrison at innovations-plus.com
> Sent: Monday, May 12, 2014 3:22 PM
> To: c320-list at lists.catalina320.com
> Subject: [C320-list] Tension settings for shrouds
> 
> Does anyone have the tension setting for the shrouds?
> 
> 
> 
> Ted - Magic Moment, Hull 424
> 
>