[C320-list] Linear Drive Installation Stainless Steel Reinforcing Plate Thickness

[Allan S Field]

The S/S plate inside the aft cabin on Sea Shadow is described as "11 GA
(.120") T304 S/S Plate - #8 Polished."  The backing plate inside the aft
port locker is described as "1/8 x 4 x 11 6061 Aluminum Flat Bar."  It is
possible that Kato Marine in Annapolis might have the templates in their
computer.  It might be worth calling them and ask them to look under my
name.  I then took the S/S plate to another metal worker who drilled the
counter-sunk mounting holes through the S/S plate.

Allan S. Field
Sea Shadow - #808
Columbia, MD

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of Dave and Ev
Sent: Tuesday, November 18, 2014 9:03 PM
To: c320-list at lists.catalina320.com
Subject: [C320-list] Linear Drive Installation Stainless Steel Reinforcing
Plate Thickness

I saw the linear drive installation on the website and saw the photo of the
stainless steel reinforcing plates installed in the aft cabin bulkhead. Can
anyone advise as to the thickness of the stainless steel plates on both
sides of the bulkhead?
Thanks
Dave Cushman
It Tips
#628