[C320-list] Dry bilge?

[Doug Treff]

CORRECTION - my mechanic recommended that I replace my bronze shaft with 
stainless when I get the PSS installed.

---
Doug Treff
doug at treff.us

On 2014-11-22 10:35, pat reynolds wrote:
> I agree with Allan on the pss shaft. I replaced my original because
> the company recommended a change every so many years.  The original
> bellows looked fine when I removed it.  As far as the mechanics
> suggestion that a bronze shaft be used, I can only think that that was
> because bronze is softer than stainless and the set screws might hold
> better.  A poor suggestion since I replaced my original bronze shaft
> with stainless after getting a line caught around it and bending it.  
>