[C320-list] Catalina 320 cradle

[Tim Westhoven]

My home marina doesn't allow jack stands, but the marina next door where I
have it hauled out does. But there is no electricity there to maintain the
batteries and no water available to get the boat ready in the spring. All
my dock mates are at my home marina and it's nice to help each other out in
the Spring. I've been on a rented cradle at the marina next door, but it's
pads are shot and if I use it this year, I'm going to have to ask them if I
can replace those pads. I'm not even sure the pads are in the right
places-- it's an old, rusty cradle that may or may not be the right fit.


*Tim Westhoven, REALTOR*

*A. A. Green Realty, Inc.*

*1045 N. Main St.*

*Bowling Green, Ohio 43402*

*419-409-1000 mobile*

*419-352-5331 office*

http://www.TimWesthoven.com
<http://t.senalcinco.com/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XZs4XHtcjVd0HFv2zGytHVRJgRK56dVJCf4J0ZWH02?t=http%3A%2F%2Fwww.timwesthoven.com%2F&si=5156808982265856&pi=68e2ccd7-517d-4f73-ce53-bf3d4e0e0188>

westhoven at wcnet.org

*Building dreams on higher ground.*


*The content of this email may not be deemed an offer, counter-offer or
acceptance until paper documents are mutually executed between the parties*.



On Mon, Oct 13, 2014 at 10:25 PM, John Meyers <jcmeyers7 at gmail.com> wrote:

> Does your marina require a cradle? Have you considered jack stands?  You
> might get by with 4, 5, or 6 of them for under 200 each. Check out
> Defender.com.
>
> John Meyers
>
> On Mon, Oct 13, 2014 at 9:16 PM, Tim Westhoven <westhoven at wcnet.org>
> wrote:
>
> > I've had bids of $3,800, $2,800 and another threw out a guess (just off
> the
> > cuff) of maybe $1,800 to build one as per the Catalina plans. I always
> > thought they would be a lot less, too. That's why I'm searching for a
> used
> > one!
> >
> >
> > *Tim Westhoven, REALTOR*
> >
> > *A. A. Green Realty, Inc.*
> >
> > *1045 N. Main St.*
> >
> > *Bowling Green, Ohio 43402*
> >
> > *419-409-1000 mobile*
> >
> > *419-352-5331 office*
> >
> > http://www.TimWesthoven.com
> > <
> >
> http://t.senalcinco.com/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XZs4XHtcjVd0HFv2zGytHVRJgRK56dVJCf4J0ZWH02?t=http%3A%2F%2Fwww.timwesthoven.com%2F&si=5156808982265856&pi=68e2ccd7-517d-4f73-ce53-bf3d4e0e0188
> > >
> >
> > westhoven at wcnet.org
> >
> > *Building dreams on higher ground.*
> >
> >
> > *The content of this email may not be deemed an offer, counter-offer or
> > acceptance until paper documents are mutually executed between the
> > parties*.
> >
> >
> >
> > On Mon, Oct 13, 2014 at 7:40 PM, GREG SUTTON <sutt47 at msn.com> wrote:
> >
> > > Probably the easiest thing to do is just have a local welder make you
> > > one.  Mine cost me $550 and it took about 2 weeks.  Plans are attached
> or
> > > you can get them directly from Catalina.
> > >
> > > Greg Sutton
> > > Liberty #128
> > >
> > >
> > > > From: westhoven at wcnet.org
> > > > Date: Mon, 13 Oct 2014 12:42:47 -0400
> > > > To: c320-list at lists.catalina320.com
> > > > Subject: [C320-list] Catalina 320 cradle
> > > >
> > > > Still hunting for a cradle for my 1999 Catalina 320. The boat is
> still
> > in
> > > > the water on Catawba Island, Ohio. Does anyone have one for sale or
> > know
> > > of
> > > > one for sale?
> > > >
> > > >
> > > > *Tim Westhoven*
> > > > *​, Affinity*
> > > >
> > > > *Hull 657*
> > >
> >
>
>