[C320-list] Yanmar exhaust architecture

[Timothy Osburn]

I just had mine replaced last month and the mechanic was able to use off
the shelf parts. I have the same engine.
On Oct 14, 2014 5:37 PM, "Graeme Clark" <cg at skyflyer.co.uk> wrote:

> I have just transitioned from one/third shared ownership of hull #303 with
> a Westerbeke to sole ownership of hull # 366 which (I have been told) is
> one of the very first to be fitted with a Yanmar 3GM30F engine.
>
> The exhaust arrangement/architecture is very different from the Westerbeke
> and I wondered if this was now “standard” in all Yanmar engined 320s or has
> it been superseded with something else?
>
> The exhaust is on the starboard side of the engine, so there is a length
> of lagged exhaust pipe as per this photo
>
> http://i59.tinypic.com/244tch3.jpg
>
> which then connects  to a section on the port side where the water is
> injected. The entire assembly looks a bit ‘home made’!
>
> If I have to replace the exhaust “elbow” (in reality not an elbow at all)
> where do I get this piece or is it custom made by a fabricator.
>
> If anyone else with a 3GM30F has a photo or diagram of the exhaust
> arrangement I’d be most grateful
>
> Many thanks
>
> Graeme,
> Britain
>
>
>