[C320-list] "drying out" - do you/have you done this?
sailorlew at aol.com
sailorlew at aol.com
Wed Apr 22 09:52:16 PDT 2015
What's shocking about that picture is that it looks like a bulb keel, not a wing.
Lew
-----Original Message-----
From: Graeme Clark <cg at skyflyer.co.uk>
To: c320-list <c320-list at lists.catalina320.com>
Sent: Wed, Apr 22, 2015 12:46 pm
Subject: Re: [C320-list] "drying out" - do you/have you done this?
Here is a link to a wing keeled boat (not Catalina) that dried itself out by
accident - I would have been so worried that a gust of wind would tip
her!
http://yachtingmonthly.media.ipcdigital.co.uk/9096/0000037b1/c848/DSC00090.JPG
More
normal drying out in Britain is like these
pics
http://coxengineering.sharepoint.com/siteimages/img_1344.jpg on
legs
and
http://s564.photobucket.com/user/simon14b/media/Photo0029.jpg.html against
posts
Graeme
On 22 Apr 2015, at 10:13, Graeme
Clark <cg at skyflyer.co.uk> wrote:
> I’m not sure if I have asked this before -
if so my apologies
>
> In Britain it is not uncommon to have a tidal range of
15ft or more and most locations will get at least 6 to 8 ft as a minimum
>
>
It is thus common practice for boat owners to ‘dry-out’ a practice I gather is
not that common in the US?
>
> picture here img_1344.jpg
>
> For those
that dont know what this is, it bascally means tying up along side a harbour
wall or what are ofetn called ‘scrubbing posts’ - wooden piles driven into the
seabed - and allowing the boat to settle on it’s keel as the tide ebbs, having
taken suitable precautions to prevent it toppling over, of course!
>
> This
saves the cost of a lift and gives a good few hours to scrub the undersides or
make some minor below waterline maintenance task.
>
> I wrote to Catalina to
ask if the boat was designed to do this and the initial repsonse I got was that
they didnt know what i was talkinga bout, so is ent them a photo and then they
said “oh, we’ve heard of people doing that sort of thing in Alaska, but no, we
didnt specifically design the boat for this”
>
> We dont have many catalina
owners in the UK, but I know of at least two who have dried out their boats at
least once or twice.
>
> This year when mine was hauled out for winter, the
new yard I am using doent use a cradle but ‘shores up’ the boat with timber
shores. As she was being lowered to the ground and the keel started to take her
weight I noticed a significant degree of flex in the hull - basically it starts
to squash as the weight - normally supposretd equally along its length by the
water - is supporte donly at the hull-keel join.
>
> Which makes me wonder
whether it is a safe practice, or is that flexing likely to crack and/or
delaminate the GRP?
>
> There are other issues, like the fact that the tip of
the rudder is about the same depth as the keel (I think?) so if the seabed is
uneven, a proportion of the laod will be taken by the rudder.
>
> I realise
the simplest and safest answer, is if in doubt, dont do it - but if someone
somewhere says “I have been drying out every two months for the past ten years”
then I know its not an issue.
>
> msny thanks, as always, for any
comments.
>
> (By the way, not sure what the costings are in the US bit in
the UK, to have a 320 craned out and craned back in, will cost in excess of
US$600 - so there is a good reason tio want to do this!
>
> Graeme
>
>
#366
> Falmouth
> England
More information about the C320-list
mailing list