[C320-list] Prop nut

[Millers]

I would try heating the nut some. A bit of expansion would greatly reduce the break away force.
Art

Sent from my iPhone

> On Apr 22, 2015, at 5:23 PM, "tharrison at innovations-plus.com" <tharrison at innovations-plus.com> wrote:
> 
> I just tried to take the prop nut off. Notice I said tried. I just came back from tool store with a 1 1/8 deep socket and a 16 inch bar, 1/2 drive.  This will be my second attempt! 
> 
> I have put WD40 on the nut. 
> 
> I did remove the cotter pin. 
> 
> I have blocked the prop with 6x6and a couple of 2x6's up against the boat bottom. 
> 
> Before I get all manly (which I am not) and use force on the nut I thought I would ask; " What am I or did I miss in trying to get this nut off"?
> 
> Ted 
> Hull 424
> Whitby Ontario 
> 
> Sent from my iPhone