[C320-list] Charleston spar - Toggle, threaded pin

[tharrison at innovations-plus.com]

Jeff that looks like the part. 

I will give them a call this morning.

Thanks,

Ted


-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of Jeff Hare
Sent: May-15-15 8:15 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Charleston spar - Toggle, threaded pin

Ted,

I *think* the toggle changed some between your boat and later boats but I'm
not sure but it might depend on the boom you have.

Here's the Charleston spar manual.  Look at page 8 and you'll see what the
new toggle/pin looks like.

http://www.catalina320.com/filemgmt_data/files/Catalina320_Standard_Mast.pdf


According to Gerry, earlier booms were more flat sections and angles,
whereas newer C320 boom share the same extrusion shape as the mast but
smaller diameter.  The newer C320 boom is cut from the mast extrusion of a
smaller Catalina (like a 22 or 27 or something) so that they didn't need to
use separate extrusions for the boom.

Jeff

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of tharrison at innovations-plus.com
Sent: Thursday, May 14, 2015 5:16 PM
To: C320-List at Catalina320.com
Subject: [C320-list] Charleston spar - Toggle, threaded pin

Does anyone know where you can get the toggle, threaded pin, and bushing
that goes between the mast and the boom?

1997 Catalina 320 with a Charleston spar. 


Ted
Hull 424 

Sent from my iPhone=