[C320-list] Shift cable problem

[Teddy Clausen]

Make sure that they have kept the rear entry bracket, They would have used a 
longer cable as well. I have just fixed mine with some helpful  photos from 
Karl, they PO took the pedestal shifters off for reasons unknown.

Happy sailing

Teddy
Cool Change 294
Port Macquarie AUS

--------------------------------------------------
From: "Sandy Olson" <jams9191 at comcast.net>
Sent: Sunday, May 24, 2015 5:16 PM
To: "320 List" <C320-List at Catalina320.com>
Subject: [C320-list] Shift cable problem

> Anyone run into this:
>
> Had boat yard replace the shift cable running from the Edison pedestal to 
> the yanmar engine. Per the yard they ran the cable using yanmar 
> recommendation which loops the cable now connecting it from the front 
> instead of from the back at the engine.
>
> The result is at the pedestal shift forward is now reverse and reverse is 
> now forward.
>
> Any suggestions or comments appreciated.  My thought is to have the yard 
> go back to the original setup connecting from the back of the engine. 
> Haven't had an issue in 13 years.
>
> Sent from my iPhone