[C320-list] Thru hull hose inside diameter

[Jeff Hare]

The Inside Diameter of our thru-hull hoses are 5/8".  I'm pretty sure that the head thru-hull is the same as all the others.

-Jeff Hare

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Dprudden
Sent: Monday, October 19, 2015 9:51 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Thru hull hose inside diameter

....some fluid came out of it where the handle was supposed to be-not sure if it was seawater or holding tank....thankfully that had just been pumped. I was able to put the handle back in place with the plug and hold it in place with duct tape. 

Forespar sent me a new handle and machine screw thinking the handle broke. There was only a small screw holding the handle to the main body of the thru hull. The screw was in the body only about 3/16" so there was very little screw in the body, which made it easy to break the body. It may be worth checking other thru hulls to make sure there are appropriate machine screws instead of a short sheet metal screw holding the handle on. 



Sent from my iPhone

> On Oct 19, 2015, at 8:38 PM, John Frost <john at frostnet.net> wrote:
> 
> That’s the precise one that almost sank me. Did yours break in a way 
> that would allow the outside liquid stuff in?
> 
>                                         +
> Happy Sailing!          /||\
> John                           / ||  \
>                                  /    ||    \
>                                /      ||      \
>                              /        ||        \
>                            /          ||          \
>                          /            ||            \
>                        /              ||              \
>                      /                ||                \
>                    /                  ||                  \ 
>                   /                    || Hull 1118 \ 
>                 /                      ||                      \ 
>               /                        ||                         \
>            /     Catalina     ||                           \
>           /     C320MKII    ||                             \ 
>         /            2007         ||                                \ 
>      /                                ||_____________\ 
>    /_____________||____ 
>     _________/__________\_____|__ 
>      \              Lake Guntersville, AL                    l_
>       \________________________________) 
>                                   \       |                              |
> | 
>                                     \__|                               |_|
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf Of David Prudden
> Sent: Monday, October 19, 2015 6:28 PM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Thru hull hose inside diameter
> 
> Does anyone know the inside diameter of the holding tank thru hull 
> hose? The handle broke odd of the thru hull, taking part of the body 
> of the thru hull fitting with it, so I need to replace it. Forespar 
> wants the hose ID to send the correct replacement.
> 
> Thanks,
> David Prudden
> #787
> 
> Sent from my iPad
>