[C320-list] 2007 C320 MK II Fin Keel Depth Transducer Offset

[Pat Ireland]

For our 2001, I have always assumed the keel to be 6'-5".  The original
6'-0" with which the boat was designed and the 5" that was added to deepen
the bilges.  Must admit that I've never laid a tape measure to it, but
running aground is not on our bucket list.  Fair wins and deep water.  Pat

On Wed, Aug 3, 2016 at 8:45 AM, Crosby Roper <vmdatsea at hotmail.com> wrote:

> I just use 6 feet. So far so good!
>
> Sent from my iPhone
>
> > On Aug 2, 2016, at 2:47 PM, Utility Email <kswanson123 at comcast.net>
> wrote:
> >
> > I have an obscure question for you.
> >
> > Does anyone happen to know the depth transducer offset dimension for a
> fin keel C320?  Either the vertical distance from the transducer on the
> underside of the hull (forward of the keel) to the bottom of the fin keel
> or the dimension from this depth transducer to the still water line (SWL)?
> >
> > I did not measure this distance at my last haul out and I can't seem to
> find it anywhere in the manual.  I guess I can just use 6 feet as that is
> the draft of a fin keel C320, but I would like to be more precise then that.
> >
> > Thanks for your help.
> >
> > David Swanson
> > S/V Emily Ann
> > 2007 C320 MK II, No. 1107
> > Mukilteo, Washington
> >
> >
>