[C320-list] Lewmar port leaks

[Jamie Pett]

Ted - not sure what gasket you mean ? I recalled the small horizontal seams on the window frame bit have not re- bedded the entire window. The water looks like it is entering at the latch.  -J 

Sent from my iPad

> On Jul 17, 2016, at 2:02 PM, "tharrison at innovations-plus.com" <tharrison at innovations-plus.com> wrote:
> 
> I had the same problem and Jeff provided my answer.
> 
> Did you remove the gasket between the two half window frame. I pull this out
> and sealed with 4200 and not a leak this year at all.
> 
> Ted 
> Hull 424 1997
> 
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
> Of Jamie Pett
> Sent: Sunday, July 17, 2016 1:58 PM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Lewmar port leaks
> 
> Help! I know there are a number of posts and I read as many as I could find
> re the operable ports leaking. I have thoroughly cleaned the glass and
> cleaned the seals with Armoural.   
> 
> I have re-caulked the exterior small horizontal seams in the frames. 
> 
> I have removed the inner plastic frame covers and tightened all the
> mounting screws.
> 
> My port side  remains leaking, mostly the aft port light. 
> 
> The leaks seem to be right at the dog or bolt that holds the port light
> closed. The dog seems tight and secure and I cannot figure out even how to
> remove it and check it further.
> 
> Any insight is appreciated. It rained hard last night and I got easily a
> pint of water through this light, soaked the port settee, the locker cover
> etc.  
> 
> Thanks - Jamie 
> Bella Luna # 614
> 
> Sent from my iPad
>