[C320-list] Depth Transducer Offset
Dick Walker
dickwalker at att.net
Thu Jun 2 10:50:06 PDT 2016
Is that your measirement
Cheers
Dick Walker
740 Olive Ave.
Coronado ,CA 92118
619.435.8986
> On Jun 2, 2016, at 10:48, Graeme Clark <cg at skyflyer.co.uk> wrote:
>
> For Canadians and Brits its 0.6m !!!
>
> Sent from mobile: please excuse typos etc.!
>
>
>> On 2 Jun 2016, at 18:45, Ron Squires <rsquires77 at netzero.com> wrote:
>>
>> Make that "Chris" in place of "Dick"! I got lost in the thread.
>>
>> _/) We cannot change the wind, but we can trim our sails.
>>
>>> On Jun 2, 2016, at 1:00 PM, Chris Burti <clburti at gmail.com> wrote:
>>>
>>> Thanks Dick,
>>> I believe that is about correct, but I forgot to log it.
>>>
>>> I've just completed installing a Raymarine e7 chart plotter and i70
>>> instrument. These replaced our 2001 ST60 Depth, Speed and Wind instruments
>>> and newer Garmin chart plotter. Now I will have to recommission the
>>> Evolution autopilot and calibrate the old transducers (used an ITC-5
>>> converter)...but the colors sure look pretty...
>>>
>>> Chris Burti
>>> Farmville, NC
>>>
>>>
>>>> On Thu, Jun 2, 2016 at 12:32 PM, Dick Walker <dickwalker at att.net> wrote:
>>>>
>>>> I think it is about 2.5 feet. But in a day or do I am going to drop a
>>>> line at the slip and measure observed. Depth and actually depth
>>>>
>>>> The admiral does not want me to correct the depth meter since it now has
>>>> as J factor built in
>>>>
>>>> Cheers
>>>>
>>>>
>>>>
>>>> Dick Walker
>>>> 740 Olive Ave.
>>>> Coronado ,CA 92118
>>>> 619.435.8986
>>>>
>>>>
>>>>
>>>>> On Jun 2, 2016, at 09:08, Chris Burti <clburti at gmail.com> wrote:
>>>>>
>>>>> Did anybody happen to record and save the depth transducer offset number
>>>>> for their C-320? All the hulls are the same, so it doesn't matter what
>>>>> year/hull #.
>>>>> Thanks,
>>>>> Chris Burti
>>>>> Commitment, #867
>>>>> Farmville, NC
>>>
More information about the C320-list
mailing list