[C320-list] Cotter Rings

[Warren Updike]

Here is a different approach. Once the turnbuckles are in the proper
position, rotate the shroud end and turnbuckle so that the upper and lower
holes are aligned. Then, using a welding rod, bend it in two places so each
end passes through the holes. Cut each end about 2 inches long and bend
down/up towards each other. Now, should you need to adjust or remove, simply
straighten the rod ends and pull out the rod. The rod may be easily re-bent
for a new position. Can be removed without tools.

Warren and Pattie Updike
1994 C320 "Warr de Mar" #62
Middle River, Chesapeake Bay

-----Original Message-----
From: Guy Henry [mailto:guyhenry222 at gmail.com] 
Sent: Thursday, June 16, 2016 11:37 AM
To: C320-List at Catalina320.com
Subject: [C320-list] Cotter Rings

Does anyone use cotter rings instead of pins on the clevis pins holding down
the shrouds or stays?

Guy 
MoonShadow #115