[C320-list] Water heater

[Jbrown5093]

Replaced water heater and now have overheating engine problem  Engine how to 190 and alarms. Infrared temp confirms 190.  Suspect an air lock but how do you get it air free?  I also didn't pay attention to how I hooked up the new hoses but can't see that there should be a directional flow through heater. It does look goof however

Jim brown
Yanmar. 2004

Sent from my iPhone

> On Mar 31, 2016, at 7:28 PM, Charles Mueller <katchu at chartermi.net> wrote:
> 
> They charged me for 117', with a little extra for the eye splice.  So 115'
> is accurate.  
> Chuck Mueller
> Northwind #676
> 
> 
> Message: 7
> Date: Thu, 31 Mar 2016 13:06:52 -0400
> From: swampcreek42 <swampcreek42 at yahoo.com>
> To: C320-List at Catalina320.com, c320-list at lists.catalina320.com
> Subject: Re: [C320-list] Halyard replacement
> Message-ID: <3t93b1pi405nh7dsn54jdsre.1459444012093 at email.android.com>
> Content-Type: text/plain; charset=utf-8
> 
> 
> 
> The manual states 115', other cordage sites state differently, do you
> remember if this was the size?
> 
> 
> Sent from my Verizon Wireless 4G LTE smartphone
> 
> -------- Original message --------
> From: Charles Mueller <katchu at chartermi.net>
> Date: 03/30/2016  5:55 PM  (GMT-05:00)
> To: c320-list at lists.catalina320.com
> Subject: [C320-list] Halyard replacement 
> 
> 
> 
> I replaced mine a few years ago and used Samson XLS Extra T.? It's a lot
> less expensive than the lines you mentioned, but still very low stretch.? As
> I recall, bought them through Defender.
> Chuck Mueller
> Northwind #676
> Holland, MI
> 
> Message: 4
> Date: Wed, 30 Mar 2016 13:11:12 -0400
> From: swampcreek42 <swampcreek42 at yahoo.com>
> To: C320-List at Catalina320.com, 320 <C320-List at catalina320.com>
> Subject: [C320-list] Time To Replace Halyards
> Message-ID: <lg33qo7awrooen5iodd2orys.1459357872452 at email.android.com>
> Content-Type: text/plain; charset=utf-8
> 
> It's time to replace my main and jib halyard. The main is starting to chafe
> so that's definitely getting changed. The jib halyard was recently replaced
> by the PO but is a larger diameter of 7/16s (?) and gets hung up when taking
> the sail down at the end of the season. Anyway, I have found a BUNCH of
> choices, regular Samson, New England V100, T900, Endura, etc. (Currently
> looking hard at NE V-100). I'm posting here for advice from anyone who has
> done this and what experience or suggestions would they have before I spend
> some major cash on something I might regret later.
> Thanks,Bruce Hunter?Nauti Time #719?
> 
>