[C320-list] Outhaul line length and diameter

[Dave Ouimette]

Alan,

good idea. Thanks.

Dave



-----Original Message-----
From: Allan S. Field <allan.field at verizon.net>
To: C320-List <C320-List at Catalina320.com>
Sent: Sat, Sep 17, 2016 8:31 am
Subject: Re: [C320-list] Outhaul line length and diameter

Would suggest you rig a messenger line to the outhaul line, pull the
   outhaul line through, measure the outhaul line, purchase the new
   outhaul line, then use the messenger to pull it back through!


   On 09/17/16, Dave Ouimette<drouimette at aol.com> wrote:

   Chris,
   Thanks for the info.
   Our boat is in Florida and I will be heading down there soon. Looks
   like I will need to look more closely at the setup.
   Dave
   Hull 174
   -----Original Message-----
   From: Chris Burti <[1]clburti at gmail.com>
   To: 320 <[2]C320-List at catalina320.com>
   Sent: Fri, Sep 16, 2016 8:47 pm
   Subject: Re: [C320-list] Outhaul line length and diameter
   It depends on how yours is rigged... if you are using the jammer on the
   mast end of the boomt, all you need is about 20' of 3/8" Stayset or
   equivalent. If it runs down from there and through a block at the base
   of
   the mast to a clutch at the halyard winches, you will need 45-50'.
   Chris Burti
   Farmville, NC
   On Fri, Sep 16, 2016 at 7:51 PM, Dave Ouimette <[3]drouimette at aol.com>
   wrote:
   >
   > I will need to replace the outhaul line on our 1995 C320 and don't
   find a
   > description of the length or diameter of the line in the c320 manual.
   Can
   > anyone help me with this. Thanks.
   >
   > Dave
  > Hull 174
   >

References

   1. mailto:clburti at gmail.com
   2. mailto:C320-List at catalina320.com
   3. mailto:drouimette at aol.com