[C320-list] Fuel sending gauge

[Jeffrey Brown]

Yes I did. The problem is one or two of the five bolts that hold the unit in are underneath some fiberglass from the aft storage locker that comes out. The space isn't sufficient to allow the bolt to be removed. I need to lift the tank out a bit but that requires moving around a lot of stuff. 

Jeff Brown
949-350-5123

> On Jul 4, 2017, at 9:07 AM, Graeme Clark <cg at skyflyer.co.uk> wrote:
> 
> Jeff
> 
> Have you removed the two wooden floor pieces above the tank. It’s fiddly but it can be done.
> 
> Graeme
> 
>> On 4 Jul 2017, at 17:04, Jeffrey Brown <oceanblues at mac.com> wrote:
>> 
>> I'm hull 78 and wondering if anyone near my hull number replaced their fuel sending gauge without pulling out the tank. One of the bolts is hard to get to. Just wondering before I begin removal of the tank. I'm even considering replacing the whole tank if I'm going to this much work. Any thoughts?
>> 
>> Jeff Brown
>> 949-350-5123
> 
> ———————————————————
> I work irregular hours and often write emails late in the evening and at weekends; that doesn’t mean I expect you to do the same; reply when convenient!
> 
> 
> 
> 
>