[C320-list] Fuel sending gauge

[Jbrown5093]

An option I thought of but never got around to was to put a small inspection port in the shelf above the tank. Not sure if it would be possible with factory air however. I should have done it.. had my sender unit out three times in past 2 seasons.

Jim Brown. 973

Sent from my iPad

> On Jul 4, 2017, at 12:07 PM, Graeme Clark <cg at skyflyer.co.uk> wrote:
> 
> Jeff
> 
> Have you removed the two wooden floor pieces above the tank. It’s fiddly but it can be done.
> 
> Graeme
> 
>> On 4 Jul 2017, at 17:04, Jeffrey Brown <oceanblues at mac.com> wrote:
>> 
>> I'm hull 78 and wondering if anyone near my hull number replaced their fuel sending gauge without pulling out the tank. One of the bolts is hard to get to. Just wondering before I begin removal of the tank. I'm even considering replacing the whole tank if I'm going to this much work. Any thoughts?
>> 
>> Jeff Brown
>> 949-350-5123
> 
> ———————————————————
> I work irregular hours and often write emails late in the evening and at weekends; that doesn’t mean I expect you to do the same; reply when convenient!
> 
> 
> 
> 
>