[C320-list] Battery plan

[Ted Harrison]

That is smart. My only problem is my fresh water pump is in that location and my wife's wine in the other

Ted Harrison

> On Jun 14, 2017, at 9:02 PM, sail-ability sail-ability <sail-ability at sympatico.ca> wrote:
> 
>   Hey Ted; I did something very similar on my boat a couple of years ago.
>   All I did was connect the two 4Ds in parallel like You're suggesting
>   and left them connected to #1 on the main bty switch. I bought a 27
>   starter bty and installed it fwd under the stbd settee. I connected it
>   to the #2 cables on the main bty switch and also to the windlass
>   cables. the only extra cabling I needed to get was to connect the two
>   4Ds in parallel. Position #1 on the bty switch is for powering the
>   house draws. Position #2 on the bty switch is for the starter and the
>   windlass. This will save U a lot of work and extra cabling.
> 
>   Cheers
> 
>   John Morrison
> 
>   1999#574
> 
>     ---------- Original Message ----------
>     From: Ted Harrison <tharrison at innovations-plus.com>
>     Date: June 14, 2017 at 8:16 PM
>     Can you tell me if I am missing anything in the below plan. This is
>     phase one.
>     - purchase 2 4D SRM Interstate batteries. They will remain in
>     current location.
>     - Build a shelf forward of the 4ds and place a group 27 battery in
>     this location. Currently have a Group 27 purchased last year.
>     - purchased two battery cables 6 feet length, connect 4d's together
>     positive to positive. Negative to negative.
>     - purchase 21 feet battery cable and run from starter (negative) to
>     group 27 negative.
>     - purchase 6 feet battery cable, negative to negative, and connect
>     house batteries
>     - purchase 20 feet positive and run from group 27 to position 1 on
>     the battery switch.
>     - positive on house bank to position 2 on battery switch
>     - positive from engine on both position on battery switch.
>     Charging: both house batteries run to a ProNauutic 12- 30 P charger.
>     - Purchased a Xantrex digital echo charge to connect group 27 to
>     house batteries to keep the starting battery topped up.
>     - battery cable 1 / 0 battery cable
>     Your evaluation / comments would be appreciated.
>     Ted Harrison
>     Hull 424
>     Whitby, Ontario