[C320-list] Keel draft

[Timothy Woods]

That makes sense, when I was shopping for my boat I find 1906 and later to
get the seats in the back swim platform.

Thank you Pat

On Mar 22, 2017 1:47 PM, "Pat Ireland" <cherie320 at gmail.com> wrote:

> If you review the posting history.  Link on 320 site, you will find that
> when the design added depth to the bilge, the draft increased, because the
> same keels were kept.  Believe subsequently there was a change on wing to
> got to 310 keel and the draft was decreased.  There may be info in the hull
> history on the 320 web site.  To measure is always best.  Pat
>
> On Wed, Mar 22, 2017 at 10:16 AM, Timothy Woods <woodstimothya at gmail.com>
> wrote:
>
> > Good afternoon group,
> >
> > I'm on the hard doing my first bottom job here in Ft lauderdale on my new
> > to me boat. The spec's call for a draft of 4'-3" on the 1996 320. From
> the
> > water line to the pavement it's 5'-8. So minus the 11" blocks it's
> sitting
> > on leaves me a 4'-7" draft. I'd like to know if this is common because
> you
> > never know what a past owner might of done.
> >
> > Thanks in advance,  Tim
> >
>