[C320-list] Radio Remote Mounting

[Chris Burti]

Tried and removed all of the electronics wiring...no go...the only way is
to remove all wiring and the engine cables. I mounted mine on the port side
of the cockpit just forward of the propane locker and near the top. Not the
ideal location of the pedestal, but functional.

Chris Burti
Farmville, NC


On Tue, Sep 12, 2017 at 6:57 AM, John Meyers <jcmeyers7 at gmail.com> wrote:

> I am looking for a way and place to mount a radio remote onto the
> pedestal.  I have the standard Edson pedestal including the instrument pod
> near the top over the compass. (I purchased and installed a Standard
> Horizon GX2200 in the cabin and then bought the remote CMP31.)
>
> The remote cable has a connector that won't fit easily into the conduit
> that goes into the gauge housing on my 1997 #406. There are about a dozen
> wires and shut off cable that uses that conduit that leads from the housing
> down to the steering box in the aft berth.  I tried pulling the
> disconnected wires down and there was a lot of resistance and not sure if I
> could push/pull those wire back through after I put through the remote
> cable.
>
> Has anyone done this? Is there another place/way to mount the radio remote?
> Any advice on what I am trying to do?
>
> Thanks in advance for any help.
>
> John Meyers
> 1997 #406
> Wind Chime
> Muskegon, MI
>