[C320-list] Water heater exhaust hose

[JERRY CLAYTON]

Danny,
Do you recall the size (diameter) of the small hose?I may opt for your new set up at a later date but for now I just wanted to replace the short hose and not have to modify any fittings.I was hoping to have a new hose in hand before I remove the old one.I imagine that you can get a new hose from any marine type , possibly auto part store and cut to desired length. 
Jerry
 
 
  On Sat, Aug 4, 2018 at 1:07 PM, danny jensen<danny at jensenshouse.com> wrote:   Jerry,
The small hose developed a leak when I was replacing the water heater. It
appeared to be a wet exhaust hose and this really we not good application
because it comes into contact with the potable water system. I opted to
replace it with the hardware as shown. I think my solution is more durable
and perhaps safer.
Danny

On Sat, Aug 4, 2018 at 12:05 PM, JERRY CLAYTON <jsea at prodigy.net> wrote:

> Danny,
>      Yes, I was hoping to replace the small hose that you show on page 2,
> third pic on row one of your gallery shots of the water heater.
> Jerry
>
>
>
>  On Sat, Aug 4, 2018 at 6:20 AM, Danny Jensen<danny at jensenshouse.com>
> wrote:  Check this photo. I replaced the small hose with this hardware. Is
> this the hose replacement you are referring to?
>
> https://c320.org/mediagallery/media.php?s=20140528143406480
>
> Sent from my iPhone
>
> > On Aug 3, 2018, at 1:59 PM, JERRY CLAYTON <jsea at prodigy.net> wrote:
> >
> >
> > I need to replace the short exhaust hose on the water heater.
> > Does anyone know
> > 1) the diameter of the hose?
> > 2) is it a special type hose for heat?3) where to purchase?
> > Thanks,
> > Jerry Clayton#988 (2004)Marina Del Rey, Ca
>