[C320-list] Tachometer issue

[Crosby Roper]

Kenneth. Thanks so much- Just what I needed!

Crosby  Roper VMD
Bay Park Veterinary Clinic
________________________________
From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of kenneth bousum <kenb711 at wowway.com>
Sent: Thursday, August 30, 2018 5:37 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Tachometer issue

Go on the catalina direct web site they have instruction on how to tell if its tack or sender. Most likely its the tack.Sender is on flywheel housing.Ken#711

----- Original Message -----

From: "Crosby Roper" <vmdatsea at hotmail.com>
To: "Jeffrey Brown" <oceanblues at mac.com>, C320-List at Catalina320.com
Sent: Thursday, August 30, 2018 3:30:49 PM
Subject: Re: [C320-list] Tachometer issue

I've pulled the tach and all wiring is intact.  I've tried locating the sender on the engine but am not sure where to look- fly wheel or alternator? or what it looks like.  This happened to me about 3 years ago and the local yanmar repair shop just replaced the tach.

Crosby  Roper VMD
Bay Park Veterinary Clinic
________________________________
From: C320-list <c320-list-bounces at lists.catalina320.com> on behalf of Jeffrey Brown <oceanblues at mac.com>
Sent: Thursday, August 30, 2018 12:26 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Tachometer issue

Make sure the wires didn’t fall off the back of the tack. Happened to me twice.

Sent from my iPhone

> On Aug 30, 2018, at 12:25 PM, Crosby Roper <vmdatsea at hotmail.com> wrote:
>
> Hi all
>
> Went out yesterday and found my tachometer dead. Needle is resting @1000 rpms and unit is not recording engine hours either. I have a Yanmar3y30 engine. Any ideas on how to troubleshoot this before I buy a new unit would be appreciated. Thanks
>
> Crosby Roper VMD
> S/V Tethys#1054
>
> Crosby  Roper VMD
> Bay Park Veterinary Clinic