[C320-list] Propane tank

John Morrison sail-ability at sympatico.ca
Mon Jun 4 16:16:03 PDT 2018


Hey JohnM this is the other JohnM. Is the tank you bought aluminum? If so $106 is a real deal as I priced them and they were well +of $200. Henceforth I’ll identify as JEM. 

Sent from my iPhone

> On Jun 4, 2018, at 6:42 PM, John Meyers <jcmeyers7 at gmail.com> wrote:
> 
> Ted,
> 
> You may be asking John Morrison but just in case you were asking me......
> 
> I bought a new tank from West Marine a year ago for $106, It was a special
> order. It was the only place to find one that fits. I got it filled at a
> local propane dealer who assured me that he was certified to fill new tanks.
> 
> John Meyers
> 
> On Mon, Jun 4, 2018 at 4:41 PM, Ted Harrison <tharrison at innovations-plus.com
>> wrote:
> 
>> John M  where did you get the tank recertified and filled?
>> 
>> Ted Harrison
>> 
>>> On Jun 4, 2018, at 3:59 PM, John Meyers <jcmeyers7 at gmail.com> wrote:
>>> 
>>> The other John M,
>>> 
>>> Thanks for that reminder that propane is heavier than air. There is a
>> drain
>>> for water in the propane locker and now I know that leaked propane should
>>> go out that drain also. Best to make sure it is clear by pouring in some
>>> water from time to time.
>>> 
>>> John Meyers
>>> Wind Chime #406
>>> 
>>> Muskegon, MI
>>> 
>>> On Mon, Jun 4, 2018 at 3:16 PM, John Morrison <sail-ability at sympatico.ca
>>> 
>>> wrote:
>>> 
>>>> Hey Ted never replaced the regulator but had the tank valve replaced.
>> Did
>>>> U find out where the gas leaked to??Don’t light a match if you smell it
>> in
>>>> the boat 💥 U probably know that propane is heavier than air and will
>>>> settle into the bilge.
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>>> On Jun 4, 2018, at 1:12 PM, Ted Harrison <tharrison at innovations-plus.
>> com>
>>>>> wrote:
>>>>> 
>>>>> John, have you ever replaced the regulator or pressure valve?
>>>>> 
>>>>> Ted Harrison
>>>>> 
>>>>>> On Jun 4, 2018, at 12:41 PM, John Morrison <sail-ability at sympatico.ca
>>> 
>>>> wrote:
>>>>>> 
>>>>>> In Canada if tank is 10years or older it will not be filled. A new
>>>> valve must be installed with the new date stamped on the tank. Costs
>> about
>>>> 30CAD, hell of a deal!
>>>>>> JohnM
>>>>>> 1999#574
>>>>>> 
>>>>>> Sent from my iPhone
>>>>>> 
>>>>>>> On Jun 4, 2018, at 8:43 AM, millers1 at aol.com wrote:
>>>>>>> 
>>>>>>> Ted,
>>>>>>> I am not sure about Canada,  I have a 2000 boat (#680, in Ct).  Two
>>>> years ago I had to get the tank re-certified.
>>>>>>> Thar required a new design safety valve be installed in top of tank
>>>> and a max. pressure test, etc.
>>>>>>> cost about $35 total.   The new valve was manadatory........
>>>>>>> 
>>>>>>> 
>>>>>>> Art
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> -----Original Message-----
>>>>>>> From: Ted Harrison <tharrison at innovations-plus.com>
>>>>>>> To: C320-List <C320-List at Catalina320.com>
>>>>>>> Sent: Sun, Jun 3, 2018 8:59 pm
>>>>>>> Subject: Re: [C320-list] Propane tank
>>>>>>> 
>>>>>>> Thank you everyone. An easy take out. Small tank.
>>>>>>> 
>>>>>>> 
>>>>>>> I will get the tank filled and look for leaks. It might be the
>> release
>>>> valve.
>>>>>>> 
>>>>>>> When I pull the tank. I cleaned the holding bed and found the drain
>>>> was plugged. I will take care of this as well. It looks like PO fixed a
>>>> leak here with silicone.
>>>>>>> 
>>>>>>> Thanks everyone
>>>>>>> 
>>>>>>> Ted Harrison
>>>>>>> 1997 hull 424
>>>>>>> Whitby Ontario
>>>>>>> 
>>>>>>>> On Jun 3, 2018, at 12:32 PM, John Meyers <jcmeyers7 at gmail.com>
>> wrote:
>>>>>>>> 
>>>>>>>> As far as needing to be recertified, the place where you have it
>>>> filled
>>>>>>>> will know by the dates stamped on the tank.
>>>>>>>> 
>>>>>>>> BTW, Last week when I went to turn on the gas I discovered it was
>>>> still on
>>>>>>>> from last year, my bad, but seemed we still had gas. But it it s
>>>> newer tank
>>>>>>>> which we bought a couple years ago
>>>>>>>> 
>>>>>>>> John Meyers
>>>>>>>> 
>>>>>>>> On Sun, Jun 3, 2018 at 12:16 PM, Elizabeth Schwartz <
>>>> schwartz781 at optimum.net
>>>>>>>>> wrote:
>>>>>>>> 
>>>>>>>>> Ahoy....The tank can be re certified,,,,just had mine done this
>>>> spring at
>>>>>>>>> large propane facility...At no charge!...Joe...#245
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> On Sun, Jun 03, 2018 at 10:50 AM, John Morrison wrote:
>>>>>>>>> 
>>>>>>>>> There are also “O” rings on the hoses  fittings which should
>>>> probably be
>>>>>>>>>> replaced. JohnM
>>>>>>>>>> 1999#574
>>>>>>>>>> 
>>>>>>>>>> Sent from my iPhone
>>>>>>>>>> 
>>>>>>>>>>> On Jun 3, 2018, at 8:27 AM, Chris Burti  wrote:
>>>>>>>>>>> 
>>>>>>>>>>> If you have a gas grill, it works the same. ¾” wrench or
>> adjustable
>>>>>>>>>>> wrench will remove the regulator fitting, no tape. Gas fittings
>>>> are the
>>>>>>>>>>> reverse of normal threads…turn clockwise to loosen, counter
>>>> clockwise to
>>>>>>>>>>> tighten…leftie tightie, rightie loosie…
>>>>>>>>>>> 
>>>>>>>>>>> You are correct, gas should not have leaked out. After you
>> replace
>>>> the
>>>>>>>>>>> gas bottle, open the valve first without turning on the gas
>>>> solenoid and
>>>>>>>>>>> check all fitting between the tank and the solenoid with soapy
>>>> water.
>>>>>>>>>>> Tighten any fittings with bubbles forming. After that, turn on
>> the
>>>> solenoid
>>>>>>>>>>> and check all fittings from there to the stove.
>>>>>>>>>>> 
>>>>>>>>>>> Never leave your solenoid on when the stove isn’t in use and it’s
>>>> a good
>>>>>>>>>>> rule for the tank valve as well.
>>>>>>>>>>> 
>>>>>>>>>>> Thanks,
>>>>>>>>>>> Chris Burti
>>>>>>>>>>> Commitment #867
>>>>>>>>>>> Farmville, NC
>>>>>>>>>>> 
>>>>>>>>>>> From: Ted Harrison
>>>>>>>>>>> Sent: Sunday, June 3, 2018 7:50 AM
>>>>>>>>>>> To: C320-List at Catalina320.com
>>>>>>>>>>> Subject: [C320-list] Propane tank
>>>>>>>>>>> 
>>>>>>>>>>> Came to the boat and left my propane tank open.
>>>>>>>>>>> The tank is now empty.
>>>>>>>>>>> How do you remove  the tank and does it need to be recertify?
>>>>>>>>>>> 
>>>>>>>>>>> The gas should not have leaked out. What should I replace while I
>>>> have
>>>>>>>>>>> the tank out?
>>>>>>>>>>> 
>>>>>>>>>>> Are the threads just wrapped  with plumbers tape?
>>>>>>>>>>> 
>>>>>>>>>>> Ted Harrison
>>>> 
>> 


More information about the C320-list mailing list