[C320-list] Rocna 15 Anchor Fit on Early C320s - Hull 268
Welch, Myron D
myron-welch at uiowa.edu
Sat Mar 24 19:29:34 PDT 2018
Cliff,
Several years ago I replaced the old shorter anchor roller on my 1995, #238, with a longer Windline model to fit my Bruce 33. The change was quite easy.
Myron Welch
Wind Instrument #238
Iowa City, Iowa
Grace Memorial Harbor
Elk Rapids, Michigan
Sent from my iPad
> On Mar 24, 2018, at 8:09 PM, Cliff Lee <rcliffordlee at gmail.com> wrote:
>
> After much consideration, I bit the bullet and bought a Rocna 15 to replace
> my CQR. I had seen past C320 list discussions about the likelihood that
> the anchor roller bail would be too small for early C320 models and indeed
> it is about 1" too short to fit the Rocna shank. No problem to buy a
> taller bail. However, I was surprised to find that the anchor roller
> itself is so short that the tip of the anchor in the secured position
> overlaps and lies up against the bow by at least 3-4". I had not seen that
> issue on previous discussions. I am wondering if I have an unusually short
> anchor roller. Mine is a Windline model and is about 20" from tip to tip,
> with the roller hub itself about 3" from the tip of the assembly. Any
> thoughts out there about whether I need a longer anchor roller, the length
> of your rollers (and your hull number), or other solutions? At this point,
> I'm afraid I may have to return the anchor. Even if I can protect the hull
> against the anchor tip, it will still bang against the hull and drive us
> crazy. Thanks for any guidance you can offer.
>
> Cliff Lee
> Comfort Zone - 1995 Hull 268
More information about the C320-list
mailing list