[C320-list] EV100 wheel pilot

[Chris Burti]

The pod is attached by two screws threaded into the pedestal. Drilling with
care and re-tapping is an option. I was able to lengthen the slot on the
wheel drive with a drill and rotary tool enough for the pin to work at its
existing location.

Chris Burti
Commitment, #867
Farmville, NC


On Wed, Mar 28, 2018 at 10:38 AM, Chuck Mueller <katchu at chartermi.net>
wrote:

> I was about to start installing a new Raymarine EV100 autopilot today and
> found that the Engine pod will need to be lowered in order to install the
> new system.  The pin from the old ST4000 system that engages the autopilot
> is too high to engage the new system, and that pin is bottomed out against
> the top of the engine pod.  Looks like I will need to drop the engine pod
> by
> an inch or two.  Has anyone done this?  If so, any thoughts on what I am
> getting into?
>
> Chuck Mueller
> Northwind #676 2000
> Holland, MI
>
>