[C320-list] Campbel Sailor prop

[John Morrison]

No but I never run the engine over 2500 and then rarely. I can get 3000 RPM with this prop but no increase in speed...just more noise and bubbles!
JEM

Sent from my iPhone

> On Nov 20, 2018, at 3:38 PM, <islgirl3 at aol.com> <islgirl3 at aol.com> wrote:
> 
> John,They spec'd a 14 x 7.5 wheel. With the 14x9 can you still hit top rpm?
> Rich
> 
> 
> -----Original Message-----
> From: John morrison <sail-ability at sympatico.ca>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Tue, Nov 20, 2018 2:30 pm
> Subject: Re: [C320-list] Campbel Sailor prop
> 
> The designation of my engine is 3GM30F. I’m sure its the same as your engine. In any event if you contact West by North (makers of the Sailer Prop) they will ask you to fill out data WRT your boat. They’ll want engine and transmission specs, and boat make. They’ll then recommend a prop for your application.
> Good Luck 
> JEM
>> On Nov 20, 2018, at 2:21 PM, <islgirl3 at aol.com> <islgirl3 at aol.com> wrote:
>> 
>> John,I assume you have a Yanmar 3GM  27HP in you boat? Just want to be sure.
>> Rich2002  897
>> 
>> 
>> -----Original Message-----
>> From: John morrison <sail-ability at sympatico.ca>
>> To: C320-List <C320-List at Catalina320.com>
>> Sent: Tue, Nov 20, 2018 12:05 pm
>> Subject: Re: [C320-list] Campbel Sailor prop
>> 
>> Yes I have one and it’s great. I went with a 14x9 RH 3 blade prop; 2100RPM gets me a boat speed of 6.5kt in flat water and it has plenty of push against a current or seaway. The drag is the lowest on the market for any fixed propellor.
>> JEM
>> 1999#574
>>> On Nov 19, 2018, at 11:58 AM, <islgirl3 at aol.com> <islgirl3 at aol.com> wrote:
>>> 
>>> Does anyone have any experience with a Campbell prop on a 320 with a Yanmar 3GM 27 HP?
>>> Rich Nuzzolo897
>>> 
>>>