[C320-list] HIgh Output Alternators
Dick Walker
dickwalker at att.net
Fri Nov 23 19:33:03 PST 2018
Me too and it has worked for 19 years.
Cheers
Dick Walker
740 Olive Ave.
Coronado ,CA 92118
619.435.8986
> On Nov 23, 2018, at 19:24, Bruce Stanley <brucestanley36 at gmail.com> wrote:
>
> I decided on the 70Amp Balmar.
>
> I did not want to fit the 100Amp (same price) because of the need of a
> double belt.
>
> I also fitted Balmar's ARS-5 Multi-Stage Voltage regulator.
>
>
>
> Bruce Stanley
>
> Sydney Australia
>
> Formally C320 / now C36
>
> On Sat, Nov 24, 2018 at 1:26 PM Gerald Rouillard <pearson39b at yahoo.com>
> wrote:
>
>> Thanks Larry and Troy. I'm starting to feel more comfortable about this
>> single belt issue.
>>
>> The Powermax unit did come with its own regulator, so I'm guessing it has
>> the battery and temperature sensing functions Troy mentions. I'm also
>> using a flooded battery bank, which puts me in his more-forgiving-category.
>>
>> Re-reading the installation instructions, I also note they make a big deal
>> out of making sure you have good belt tension - a point I'm not sure we
>> fully appreciated with the previous, Yanmar installation.
>>
>> During this discussion, yet another consideration occurred to me. The
>> Yanmar problem might have been exacerbated by the additional load of the
>> belt-driven, raw-water pump, which is not a factor with the Westerbeke and
>> its mechanically driven pump. Not sure how much that additional load might
>> have contributed, but it is suspect at this point.
>>
>> Definitely going to monitor the belt wear next year, but my worry factor
>> is diminishing..
>>
>> Regards,
>> Sailor Jerry
>>
>>
>> Sent from my iPad
>>
More information about the C320-list
mailing list