[C320-list] Looking for putty

[John Morrison]

I know lots of folks who use 3M 5200 for jobs such as this. It is however permanent, not to be used if you ever might want to separate the parts. Not sure you’d want to do this for Ur project though.
JEM
1999#574

Sent from my iPhone

> On Sep 6, 2018, at 1:44 PM, Ted Harrison <tharrison at innovations-plus.com> wrote:
> 
> How about Dow Corning 795 white 
> Hull 423 
> Ted Harrison
> 
>> On Sep 6, 2018, at 10:10 AM, Scott Westwood <scottwestwood at bellsouth.net> wrote:
>> 
>> I need to fill an irregular concave void for a backing plate on the inside of rough fiberglass.  I heard of a putty type material (I think it was pink?) that you can cram into a void and it would harden.  I don't want anything that will flex.
>> I could use that tube of grey steel 2-part putty but in my experience it cures brittle.  That would likely crumble with vibrations over time???
>> The void is small.  Maybe 1 inch wide by about 4-5 inches long and about 1/2 inch think.  I can't smooth it out enough.  I need to fill the voids.
>> Any thoughts? 
>> Thanks,
>> Scott Westwood scottwestwood at bellsouth.net H (919)-362-8538    C (919)-618-7185