[C320-list] KM2P SAE 30 OIL level

[Danny Jensen]

https://youtu.be/9Gx3Uqop_1I

My video on the exact subject.

Danny
972

Sent from my iPhone

> On Jun 4, 2019, at 7:10 PM, CARY DENNIS LOWE <cdlowe1769 at sbcglobal.net> wrote:
> 
> Help
> 
> Sent from my iPad
> 
>> On Jun 4, 2019, at 6:11 PM, Doug Treff <doug at treff.us> wrote:
>> 
>> Jeff, 
>> 
>> The stated capacity of the transmission is for when it's level. Because it is on a slant, the amount is less. Somewhere I have it written down. I'll look around for the correct amount.
>> 
>> As others have stated, it's read when the dipstick is set in but not threaded down.
>> 
>> --
>> Doug Treff
>> doug at treff.us
>> 
>>> On Tue, Jun 4, 2019, at 8:19 PM, Jeff Hare wrote:
>>> Hi all, Hull 809 with 3gm30f yeu and Km2p transmission...I checked the 
>>> transmission oil and saw that it was about 1/4" above the line.  Just 
>>> setting the dipstick in, and a little higher when screwed in.  So I 
>>> drained the transmission oil and put 300ml (0.3L) back in as the manual 
>>> says for this km2p unit.  The oil level is now 1/2" higher than the old 
>>> oil level.Is the line on the dipstick just the bare min oil level?    
>>> There is no upper oil level line...  I seem to have to ask this every 
>>> time.  I have CRS apparently.Am I good here?Jeff Hare
>